Connect

SCPI Command :

[SOURce<HW>]:AREGenerator:OSETup:MULTiinstrument:CONNect

class ConnectCls[source]

Connect commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None[source]

# SCPI: [SOURce<HW>]:AREGenerator:OSETup:MULTiinstrument:CONNect
driver.source.areGenerator.osetup.multiInstrument.connect.set()

Triggers connection to all secondary instruments by establishing a control connection via LAN. The R&S AREG800A connects all secondary instruments as configured by their IP address or hostname. See [:SOURce<hw>]:AREGenerator:OSETup:MULTiinstrument:SECondary<st>:HOSTname.

set_with_opc(opc_timeout_ms: int = -1) → None[source]

# SCPI: [SOURce<HW>]:AREGenerator:OSETup:MULTiinstrument:CONNect
driver.source.areGenerator.osetup.multiInstrument.connect.set_with_opc()

Triggers connection to all secondary instruments by establishing a control connection via LAN. The R&S AREG800A connects all secondary instruments as configured by their IP address or hostname. See [:SOURce<hw>]:AREGenerator:OSETup:MULTiinstrument:SECondary<st>:HOSTname.

Same as set, but waits for the operation to complete before continuing further. Use the RsAreg800.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms:

Maximum time to wait in milliseconds, valid only for this call.