Mode

SCPI Command :

[SOURce<HW>]:AREGenerator:FRONtend:TRX<CH>:CABLecorr:CONNector<DI>:RX<ST>:MODE
class ModeCls[source]

Mode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(trxFrontent=TrxFrontent.Default, connector=Connector.Default, rxIndex=RxIndex.Default) AregCableCorrSour[source]
# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:TRX<CH>:CABLecorr:CONNector<DI>:RX<ST>:MODE
value: enums.AregCableCorrSour = driver.source.areGenerator.frontend.trx.cableCorr.connector.rx.mode.get(trxFrontent = repcap.TrxFrontent.Default, connector = repcap.Connector.Default, rxIndex = repcap.RxIndex.Default)

Selects the source for cable correction data.

param trxFrontent:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trx’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param rxIndex:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rx’)

return:

areg_cabel_cor_mod: - USER: Selects user-defined cable correction data, i.e. fixed values for delay and attenuation. - S2P: Selects cable correction data from a file with file extension *.s2p. - FACTory: For TRX-type frontends only.Selects cable correction data for the TRX frontend from factory specification.

set(areg_cabel_cor_mod: AregCableCorrSour, trxFrontent=TrxFrontent.Default, connector=Connector.Default, rxIndex=RxIndex.Default) None[source]
# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:TRX<CH>:CABLecorr:CONNector<DI>:RX<ST>:MODE
driver.source.areGenerator.frontend.trx.cableCorr.connector.rx.mode.set(areg_cabel_cor_mod = enums.AregCableCorrSour.FACTory, trxFrontent = repcap.TrxFrontent.Default, connector = repcap.Connector.Default, rxIndex = repcap.RxIndex.Default)

Selects the source for cable correction data.

param areg_cabel_cor_mod:
  • USER: Selects user-defined cable correction data, i.e. fixed values for delay and attenuation.

  • S2P: Selects cable correction data from a file with file extension *.s2p.

  • FACTory: For TRX-type frontends only.Selects cable correction data for the TRX frontend from factory specification.

param trxFrontent:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trx’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param rxIndex:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rx’)