Source code for RsAreg800.Implementations.Read.Power

from typing import List

from ...Internal.Core import Core
from ...Internal.CommandsGroup import CommandsGroup
from ... import repcap


# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs] class PowerCls: """Power commands group definition. 1 total commands, 0 Subgroups, 1 group commands""" def __init__(self, core: Core, parent): self._core = core self._cmd_group = CommandsGroup("power", core, parent)
[docs] def get(self, channel=repcap.Channel.Default) -> List[float]: """SCPI: READ<CH>:[POWer] \n Snippet: value: List[float] = driver.read.power.get(channel = repcap.Channel.Default) \n Triggers power measurement and displays the results. Note: This command does not affect the local state, i.e. you can get results with local state on or off. For long measurement times, we recommend that you use an SRQ for command synchronization (MAV bit) . \n :param channel: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Read') :return: power: The sensor returns the result in the unit set with command method RsAreg800.Sense.Unit.Power.set Certain power sensors, such as the R&S NRP-Z81, return two values, first the value of the average level and - separated by a comma - the peak value.""" channel_cmd_val = self._cmd_group.get_repcap_cmd_value(channel, repcap.Channel) response = self._core.io.query_bin_or_ascii_float_list(f'READ{channel_cmd_val}:POWer?') return response