Connect

SCPI Command :

[SOURce<HW>]:AREGenerator:SWUNit:CONNect

class ConnectCls

Connect commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None

# SCPI: [SOURce<HW>]:AREGenerator:SWUNit:CONNect
driver.source.areGenerator.swunit.connect.set()

Triggers connection to the switching unit. The R&S AREG800A connects or disconnects the switching unit as configured by its IP address or hostname.

set_with_opc(opc_timeout_ms: int = -1) → None

# SCPI: [SOURce<HW>]:AREGenerator:SWUNit:CONNect
driver.source.areGenerator.swunit.connect.set_with_opc()

Triggers connection to the switching unit. The R&S AREG800A connects or disconnects the switching unit as configured by its IP address or hostname.

Same as set, but waits for the operation to complete before continuing further. Use the RsAreg800.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms:

Maximum time to wait in milliseconds, valid only for this call.