File

SCPI Command :

[SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:TX<ST0>:USER:FILE
class FileCls[source]

File commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channel=Channel.Default, connector=Connector.Default, txIndexNull=TxIndexNull.Default) str[source]
# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:TX<ST0>:USER:FILE
value: str = driver.source.areGenerator.frontend.fe.cableCorr.connector.tx.user.file.get(channel = repcap.Channel.Default, connector = repcap.Connector.Default, txIndexNull = repcap.TxIndexNull.Default)

Requires [:SOURce<hw>]:AREGenerator:FRONtend:TRX<ch>|QAT<ch>|FE<ch>|CFE<ch>:CABLecorr:CONNector<di>:RX|TX:MODE S2P. Loads a cable correction data file with file extension *.s2p from the default or the specified directory.

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fe’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param txIndexNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Tx’)

return:

areg_cable_cor_fil: No help available

set(areg_cable_cor_fil: str, channel=Channel.Default, connector=Connector.Default, txIndexNull=TxIndexNull.Default) None[source]
# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:TX<ST0>:USER:FILE
driver.source.areGenerator.frontend.fe.cableCorr.connector.tx.user.file.set(areg_cable_cor_fil = 'abc', channel = repcap.Channel.Default, connector = repcap.Connector.Default, txIndexNull = repcap.TxIndexNull.Default)

Requires [:SOURce<hw>]:AREGenerator:FRONtend:TRX<ch>|QAT<ch>|FE<ch>|CFE<ch>:CABLecorr:CONNector<di>:RX|TX:MODE S2P. Loads a cable correction data file with file extension *.s2p from the default or the specified directory.

param areg_cable_cor_fil:

No help available

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fe’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param txIndexNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Tx’)