Mode

SCPI Command :

[SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:TX<ST0>:MODE

class ModeCls[source]

Mode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channel=Channel.Default, connector=Connector.Default, txIndexNull=TxIndexNull.Default) → AregCableCorrSour[source]

# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:TX<ST0>:MODE
value: enums.AregCableCorrSour = driver.source.areGenerator.frontend.fe.cableCorr.connector.tx.mode.get(channel = repcap.Channel.Default, connector = repcap.Connector.Default, txIndexNull = repcap.TxIndexNull.Default)

Selects the source for cable correction data.

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fe’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param txIndexNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Tx’)

return:

areg_cabel_cor_mod: - USER: Selects user-defined cable correction data, i.e. fixed values for delay and attenuation. - S2P: Selects cable correction data from a file with file extension *.s2p. - FACTory: For TRX-type frontends only.Selects cable correction data for the TRX frontend from factory specification.

set(areg_cabel_cor_mod: AregCableCorrSour, channel=Channel.Default, connector=Connector.Default, txIndexNull=TxIndexNull.Default) → None[source]

# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:TX<ST0>:MODE
driver.source.areGenerator.frontend.fe.cableCorr.connector.tx.mode.set(areg_cabel_cor_mod = enums.AregCableCorrSour.FACTory, channel = repcap.Channel.Default, connector = repcap.Connector.Default, txIndexNull = repcap.TxIndexNull.Default)

Selects the source for cable correction data.

param areg_cabel_cor_mod:

USER: Selects user-defined cable correction data, i.e. fixed values for delay and attenuation.

S2P: Selects cable correction data from a file with file extension *.s2p.

FACTory: For TRX-type frontends only.Selects cable correction data for the TRX frontend from factory specification.

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fe’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param txIndexNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Tx’)