Attenuation

SCPI Command :

[SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:RX<ST>:USER:ATTenuation
class AttenuationCls[source]

Attenuation commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channel=Channel.Default, connector=Connector.Default, rxIndex=RxIndex.Default) float[source]
# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:RX<ST>:USER:ATTenuation
value: float = driver.source.areGenerator.frontend.fe.cableCorr.connector.rx.user.attenuation.get(channel = repcap.Channel.Default, connector = repcap.Connector.Default, rxIndex = repcap.RxIndex.Default)

Requires [:SOURce<hw>]:AREGenerator:FRONtend:TRX<ch>|QAT<ch>|FE<ch>|CFE<ch>:CABLecorr:CONNector<di>:RX|TX:MODE USER or [:SOURce<hw>]:AREGenerator:FRONtend:TRX<ch>|QAT<ch>|FE<ch>|CFE<ch>:CABLecorr:CONNector<di>:RX|TX:MODE S2P. Sets a user-defined attenuation value.

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fe’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param rxIndex:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rx’)

return:

areg_cable_corr_at: No help available

set(areg_cable_corr_at: float, channel=Channel.Default, connector=Connector.Default, rxIndex=RxIndex.Default) None[source]
# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:FE<CH>:CABLecorr:CONNector<DI>:RX<ST>:USER:ATTenuation
driver.source.areGenerator.frontend.fe.cableCorr.connector.rx.user.attenuation.set(areg_cable_corr_at = 1.0, channel = repcap.Channel.Default, connector = repcap.Connector.Default, rxIndex = repcap.RxIndex.Default)

Requires [:SOURce<hw>]:AREGenerator:FRONtend:TRX<ch>|QAT<ch>|FE<ch>|CFE<ch>:CABLecorr:CONNector<di>:RX|TX:MODE USER or [:SOURce<hw>]:AREGenerator:FRONtend:TRX<ch>|QAT<ch>|FE<ch>|CFE<ch>:CABLecorr:CONNector<di>:RX|TX:MODE S2P. Sets a user-defined attenuation value.

param areg_cable_corr_at:

No help available

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fe’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param rxIndex:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rx’)