Mode

SCPI Command :

[SOURce<HW>]:AREGenerator:FRONtend:CFE<CH>:CABLecorr:CONNector<DI>:RX<ST>:MODE

class ModeCls

Mode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channel=Channel.Default, connector=Connector.Default, rxIndex=RxIndex.Default) → AregCableCorrSour

# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:CFE<CH>:CABLecorr:CONNector<DI>:RX<ST>:MODE
value: enums.AregCableCorrSour = driver.source.areGenerator.frontend.cfe.cableCorr.connector.rx.mode.get(channel = repcap.Channel.Default, connector = repcap.Connector.Default, rxIndex = repcap.RxIndex.Default)

Selects the source for cable correction data.

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cfe’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param rxIndex:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rx’)

return:

areg_cabel_cor_mod: USER| S2P| FACTory USER Selects user-defined cable correction data, i.e. fixed values for delay and attenuation. S2P Selects cable correction data from a file with file extension *.s2p. FACTory For TRX-type frontends only. Selects cable correction data for the TRX frontend from factory specification.

set(areg_cabel_cor_mod: AregCableCorrSour, channel=Channel.Default, connector=Connector.Default, rxIndex=RxIndex.Default) → None

# SCPI: [SOURce<HW>]:AREGenerator:FRONtend:CFE<CH>:CABLecorr:CONNector<DI>:RX<ST>:MODE
driver.source.areGenerator.frontend.cfe.cableCorr.connector.rx.mode.set(areg_cabel_cor_mod = enums.AregCableCorrSour.FACTory, channel = repcap.Channel.Default, connector = repcap.Connector.Default, rxIndex = repcap.RxIndex.Default)

Selects the source for cable correction data.

param areg_cabel_cor_mod:

USER| S2P| FACTory USER Selects user-defined cable correction data, i.e. fixed values for delay and attenuation. S2P Selects cable correction data from a file with file extension *.s2p. FACTory For TRX-type frontends only. Selects cable correction data for the TRX frontend from factory specification.

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cfe’)

param connector:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Connector’)

param rxIndex:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rx’)